OpenLara MiniGL V3 - diagnostic build t30 (2.11.2026)

For the crash after lowlevel.library on a real Voodoo3. Nothing else changed.

1. Extract into the OpenLara-MiniGL drawer, beside DATA. It replaces
   OpenLara-MiniGL-V3.
2. Start from the OpenLara-V3 icon, or from Shell: Execute OpenLara-V3
   (never start the exe directly: it needs the 2 MB stack).
3. After the crash, reboot and send back these files from the drawer:
     OpenLara-diag.txt
     OpenLara.log
   Also note the GURU number shown.
4. Then try without the CD32 pad code, from Shell:
     Execute OpenLara-V3-NoPad
   and send OpenLara-diag.txt from that run too.

OpenLara-diag.txt lists the startup steps reached and, for a CPU exception,
the crash address and registers. In SnoopDos the same steps appear as failed
opens of v3chk-NN; those failures are expected.
Please also say which CPU and accelerator you have, and the Warp3D version.
